Glock Pistol Questions

This is a discussion on Glock Pistol Questions within the Glock Talk and Discussion forums, part of the Glock General Discussion category; Hello! I hope that members can help me. I am semi-retired and trying to leard about firearms so I can be a light parttime gunsmith ...

Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member hoppy74's Avatar
    Join Date
    Apr 2012
    Location
    Lake Dallas, Texas
    Posts
    9

    Glock Pistol Questions

    Hello! I hope that members can help me. I am semi-retired and trying to leard about firearms so I can be a light parttime gunsmith in the future. I am taking a self taught Armorer's course with quiz questions - this is not a course or an exam. I am have problems with some of the material in the book or with the quiz questions. Thanks for your help!

    Glock Pistols – Personal Note # 11. On the Glock pistol, I am having a problem determining what Glock gun part holds the slide cover plate in place. My possible quiz answers are as follows. My best guess answer would be “d”.
    a) The rear of the firing pin
    b) The locking block
    c) The firing pin safety
    d) The spacer sleeve (striker sleeve)
    e) The connector

    Glock Pistols – Personal Note # 12. On the Glock pistol, I need to determine what prevents the firing pin spring from moving forward and off of the firing pin? My possible quiz answers are as follows. My best guess answer would be “d”.
    a) The rear portion of the breech face
    b) The firing pin itself
    c) The spacer sleeve (striker sleeve)
    d) The spring cups
    Last edited by hoppy74; 04-25-2012 at 06:55 AM.

  2. #2
    RMD
    RMD is offline
    Senior Member RMD's Avatar
    Join Date
    Aug 2011
    Posts
    1,289
    Welcome to the forum!

    I'm gonna guess D for #11. I believe the firing pin spring is pushing the spacer sleeve against the plate to keep it from falling out.

    I want to say the spring cup for #12, but you may be right.

  3. #3
    Senior Member texcowboy's Avatar
    Join Date
    Dec 2011
    Location
    Fort Worth Texas area
    Posts
    3,867
    You will find that U-tube can supply a lot of answers about the Glock pistol, just go to U-tube, and put 'Glock' in the search and watch what happens. I know there are a few on detail stripping that are very good.
    Last edited by texcowboy; 04-17-2012 at 02:54 PM.
    Only a Biker knows why a Dog hangs his head out the window.

    G29SF, G20SF, G30SF, G36, G21SF RTF2, G32 GEN 4, G33, G19

    NRA Life Member.

  4. #4
    Senior Member ZombieKiller57's Avatar
    Join Date
    Jul 2011
    Location
    Mid Atlantic
    Posts
    2,108
    Quote Originally Posted by RMD View Post
    Welcome to the forum!

    I'm gonna guess D for #11. I believe the firing pin spring is pushing the spacer sleeve against the plate to keep it from falling out.

    I want to say the spring cup for #12, but you may be right.
    I believe we have a couple of Glock armors here that will be able to validate the answers but I agree with RMD, 11 = D 12 = D
    Last edited by ZombieKiller57; 04-17-2012 at 09:06 AM.

  5. #5
    Senior Member spfldguns's Avatar
    Join Date
    Feb 2012
    Posts
    188
    Quote Originally Posted by ZombieKiller57 View Post
    I believe we have a couple of Glock armors here that will be able to validate the answers but I agree with RMD, 11 = D 12 = D
    +1 on those answers
    PROUD NRA ENDOWMENT LIFE MEMBER

  6. #6
    RMD
    RMD is offline
    Senior Member RMD's Avatar
    Join Date
    Aug 2011
    Posts
    1,289
    If I got those right, I'm gonna freak cause I suck at the quizes & haven't stripped a slide since last summer

  7. #7
    Senior Member john51277's Avatar
    Join Date
    Apr 2012
    Posts
    126
    Definitely "D" for both questions.

  8. #8
    Super Moderator Gray_Wolf's Avatar
    Join Date
    May 2011
    Posts
    475
    Good luck with the study, but something like gunsmithing IMO is better learned with practice than books.

    So make sure you buy a Glock and play with it enough

  9. #9
    Senior Member rowabi's Avatar
    Join Date
    Feb 2012
    Location
    Right Here
    Posts
    4,748
    Quote Originally Posted by Gray_Wolf View Post
    Good luck with the study, but something like gunsmithing IMO is better learned with practice than books.

    So make sure you buy a Glock and play with it enough
    +1 on that...practice makes better!!! And welcome to the forum, Hoppy74
    Glock softly and leave your big stick at home...
    rowabi

  10. #10
    Junior Member hoppy74's Avatar
    Join Date
    Apr 2012
    Location
    Lake Dallas, Texas
    Posts
    9
    Yes, I plan in the future to really practice with a real Glock. Thanks!

Page 1 of 2 12 LastLast

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Smith & Wesson M&P Shield 9mm / .40 S&W Pistol
    By ZombieKiller57 in forum Other Firearms
    Replies: 65
    Last Post: 01-04-2013, 08:36 AM
  2. World’s smallest .45 concealed carry pistol
    By ZombieKiller57 in forum Glock Talk and Discussion
    Replies: 30
    Last Post: 04-10-2012, 04:59 PM
  3. GLOCK Announces New Full Size .45 ACP Pistol
    By ZombieKiller57 in forum Glock Talk and Discussion
    Replies: 22
    Last Post: 04-07-2012, 01:16 PM
  4. How do you sight a pistol
    By jake in forum Glock Talk and Discussion
    Replies: 7
    Last Post: 03-16-2012, 09:27 AM
  5. My Small Pistol Collection
    By eddiejester in forum New Member Welcome Center
    Replies: 8
    Last Post: 03-14-2012, 07:37 PM

Search tags for this page

copy of glock armorer's course written test

,

copy of the glock armorer test

,
glock armorer sample test questions
,

glock armorer test questions

,

glock armorer written test

,

glock armorer's course test

,
questions about a glock pistol
,

what gun part holds the slide cover plate in place on a glock pistol

Click on a term to search for related topics.