Glock Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
hey guys,

so i bought a 3.5 lbs ghost trigger connecter from a local shop. i took it to the range today and it felt like a full auto when i shot it...wich is cool but. i would pull the trigger it would shoot then when i let off it would shoot again. it did it for about 100 rds then slowly started to slow down and fire correctly. anyone have this trouble or should i just polish up the regular connector and use that?
 

·
Registered
Joined
·
3,865 Posts
I would take it to a gunsmith and have it checked. Even if it is firing correctly now it could go haywire again. I have 3.5 # connectors in all of my Glocks and no problem, although I had all installed by a gunsmith.
 

·
Registered
Joined
·
21,518 Posts
dup thread
 

·
Registered
Joined
·
2,109 Posts
prolly my best bet, thanks for the info.
I would say to you. DO NOT SHOOT THIS UNTIL YOU TAKE IT TO A GUN SMITH. If you happen to cross path with a cop at the range you may find yourself in federal prison or at the least out several thousand dollars in penalties. Even if it was an inadvertent modification you will pay dearly. BATF does not take that lightly.
 
1 - 5 of 5 Posts
Top