Glock Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I hope that members can help me. I am semi-retired (74) and trying to learn about firearms so I can be a light parttime gunsmith in the future. I am taking a self taught self passed Armorer's course with quiz questions - this is not a course or an exam. I am have problems with some of the material in the book or with the quiz questions in the book.

I believe that this batch of quiz questions will be the last one. There were about 50 to 60 quiz questions. You have all help me on several ones that I was having problems with. Thanks for your help!

Glock Pistols – Personal Note # 14. On the Glock Pistol what may happen if the extractor's tensioning assembly is put in the slide backwards? I believe that the correct answer is “b”.
a) The extractor will pop out of the slide
b) The gun will drop a case every once in a while
c) Gas will squirt into the shooter's eye
d) The gun will short cycle

Glock Pistols – Personal Note # 15. On the Glock Pistol, how many pins hold the fire control system into the frame? I believe that the correct answer is “b”.
a) 1
b) 2
c) 3
d) 4

Glock Pistols – Personal Note # 31. On the Glock Pistol, how does the trigger safety work? My answer is “b”.
a) Unless the pad of the finger pushes the trigger safety rearward, the trigger safety will not bump into the firing pin safety and turn it off
b) The pad of the finger pushes the trigger safety rearward and up so that the trigger safety clears the frame and allows the trigger to continue rearward until the gun fires
c) The trigger safety hits the trigger bar and pushes it upward and out of engagement with the frame so it can travel rearward until the gun is fired

Glock Pistols – Personal Note # 33. On the Glock Pistol, what turns off the firing pin safety? My answer is ‘c”.
a) The end of the trigger safety
b) The trigger bar
c) The slide stop lever
d) The trigger pin
e) The spring cups

Glock Pistols – Personal Note # 34. On the Glock pistol, when the extractor comes out of the slide, what parts can drop out as well? My answer is “c”.
a) The spring cups
b) The firing pin
c) The firing pin safety spring and the firing pin safety
d) The connector
e) None of the above
 

·
Registered
Joined
·
3,865 Posts
Going to have to let someone more knowledable then I to help you on this. Congrats on your endeavor and good luck. I see you live about 40 miles or so from me.
 

·
Registered
Joined
·
188 Posts
Not to be rude or disrespectful, but is it ethical to have us do your homework for you? Also, do you ask other forums like S&W , sig, colt, etc?
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #4 ·
I am sorry you feel that way. There are 60 quiz questions. I only need help with several questions I am not sure of the answerrs. I always try to answer the questions first and ask if I am correct. I am not taking an exam or course. I am not on other Forums. Thanks for your help!
 
1 - 5 of 5 Posts
Top