Glock Forum banner

1 - 20 of 87 Posts

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #1 · (Edited)
I am going to make my own page, and do everything from it. I have been chasing my tail on this forum, and that is hereby fixed, because I have given myself a home page, to come to.
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #3 · (Edited)
Loen Trotsky Quotes.

Those comrades who assert most flatly, with the greatest insistence and sometimes most brutally, that every difference of opinion, every grouping of opinion, however temporary, is an expression of the interests of classes opposed to the proletariat, do not want to apply this criterion to bureaucratism.

The New Course (1923)

https://www.marxists.org/archive/trotsky/quotes.htm

It looks like Leon knew what the Deep State was, where an opinion had better be PC, or else! The Bureaucracy has an opinion, did you know that?
Yeah, every fat, useless dreg that sits behind a bureau desk, has a PC world view. And YOU had better toe their line, BOY!

PS: I ain't sure what Trotsky was yammering about for the most part; but with this quote, I think that he meant, that ya better get in line with Commie thought.
[Or, you would be sent to the Gulag, because that is what always followed any dissent. ]
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #6 · (Edited)
Forum Whoring Is A Forte Of Mine.

So, I wuz over on another forum, just a whorin' around, as usual: and Communism arose as a topic, so I lit into that guy, and told him a thing or 1/2 thing, or sumthin".
{ {Where am I? I done got turnt arount.}}

Yeah, Communism sucks, that is where I was at, or gettin' to. Between Marx, Engels, Lenin, Stalin & Mao, there wuz 100,000,000 dead people lying around.
Here let me make this short, if Stalin had not signed the Non Aggression Pact with Hitler; then WWII would have an inauspicious beginning. Stalin sent Hitler more stuff than he could use.

And Hitler was a half-wit to follow through on invading Russia. He wrote that into Mein Kampf you know, he wrote that the East was ground to take for the German people.
And that the East Euro's were garbage, and only fit to be slaves; or shot and planted as fertilizer, for the growing of tall corn; so that the SS could be strong and stout.

Yea, OK, so I made parts of that up, so sue me. Hey! With me and this thread, I here and now give a double your money back guarantee. :cool:
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #10 ·
President Trump Delivers Remarks at the National Christmas Tree Lighting Ceremony

[video=youtube;Hiza2vrGA6o]https://www.youtube.com/watch?time_continue=9&v=Hiza2vrGA6o&feature=emb_title[/video]
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #12 ·
[video=youtube;qeJXYhdfR6Q]https://www.youtube.com/watch?v=qeJXYhdfR6Q&list=PLkMQK78_EaD2Ow7eBGdntFRzVROt2thEh[/video]
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #13 ·
[video=youtube;kvrDKlV2Kw0]https://www.youtube.com/watch?v=kvrDKlV2Kw0&list=PLkMQK78_EaD2Ow7eBGdntFRzVROt2thEh&index=29[/video]
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #15 · (Edited)
I Bought A Bowie Knife For Five Bucks.

[I had this over on another thread, and I figured I would transfer it to here.]

Yeah, I got it at the Wagon Wheel Flea Market on Park Blvd in Saint Petersburg. It is a brute too, and it took an edge, with no trouble, so you never know. A good deal is a good deal, in my book.
I got it for inside of the house defense, and I will split a skull with it, if I have to. So, anyway, here is hoping that it never happens. But, I think that I will prove my machismo, by chopping down a small sapling or something. I already have the knife, so I gotta do something with it. That thing has a 10 inch blade, with mild rust, and that kind of steel takes a good edge.

https://www.glockforum.net/forum/blades/43547-i-bought-bowie-knife-five-bucks.html
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #17 · (Edited)
Free Falling.

Back out of a  C130.......d52e77885113fbd99afa62c04b86d749.jpg
I saw a guy do this once, and he did a back flip. He was a Green Beret show-off in my last NG unit; he was in fact the 1st Sgt, of my battalion, the 2/19 in Ceredo WV.
I think that we were over Camp Williams, UT: or it mighta been at Fort Puke, LA. I am old now, and I am all messed up, from diabetes, so I gets my details wrong sometimes.

Anyhow, he hobbled when he walked, due to his joints being all used up from packing 100 pound rucksacks. But, he still had some grit in him, and he was no one to under-estimate either.

He was about 5'8", and had more guns that I did; and I had 8 or 9 at that time. Here is what I had re-enforced by my time in SF, pay attention and call everyone sir.
You don't know who they are, so be respectful; because you can be a clod any time that you choose to be, after you learn them; because they might be a clod too.

But, not everyone is that.

These are locales of my old SF battalion.......2nd Battalion 19th SFG (A):::::: Located in West Virginia, Ohio, and Rhode Island
And the 19th Group is scattered from the East Coast, all the way out to California. It picked up battalions, when the Army NG was downsized, in the 1990's-2000's.

https://ut.ng.mil/Units/19th-Special-Forces-Group-Airborne/

PS: The Ranger battalion that was located in Michigan, was cut, and they are no more. My whole Group was nearly cut, but I prayed and another NG Group was skewered instead. And they are history now, because I prayed for the 19th to survive.
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #19 · (Edited)
On KnifeCenter.com

Condor 8'.....Knifecenter.....CN2428_02.jpg ...
Condor 8"

Here is my thinking on this one, it is just what you need, when you need a killing knife. Because this kind would do it, and it is priced at $90 with free S&H.
I am of the opinion that a pitbull would not stand a chance against it.:) Neither would his gangster owner, for that matter.
https://www.knifecenter.com/item/CN2428/condor-tool-knife-ctk242-8-primitive-bush-knife-blasted-satin-stainless-steel-blade-hardwood-handle-leather-sheath

Sharpfinger.....SCH152OT_LS1R.jpg
Schrade 152OT Old Timer Sharpfinger Fixed 3.5" Blade, Delrin Handles

Swinging over to a small one, I have always liked the way that a Sharp Finger looks, since it is pretty small. It is a direct contrast to that big-mojo Condor I guess.
The site calculated that it would cost $4 S&H. And you know, it might be worth it to have it shipped, the crowds no-a-days seem to be made up of Bozo's off-spring.
https://www.knifecenter.com/item/SCH152OT/schrade-152ot-old-timer-sharpfinger-fixed-delrin-handles

BUCK.....670038e519de0aaf57a0e5ed8d3fb79a_4000x.progressive.jpg
Buck Knives Stockman w/ Three Blades and Woodgrain Handle, 3.875" Closed - 5718

This is a Buck Stockman-style, I had one of these, and they are really handy. They take a keen edge easily, and they slip into a watch pocket, of a pair of blue jeans. They are easy to lose though, I lost mine, it was tiny, and almost diminutive; it would make a good ladies/kids knife, IMHO.
https://www.knifecenter.com/item/BU371BRW/buck-knives-stockman-w-three-blades-and-woodgrain-handle

Case Stockman....CA081.jpg
Case Work Series Small Stockman 2.625" Jigged Brown Synthetic Handles (6333 SS) - 00081

This Case is more like the knife that I had, these little devils can cut, so don't let the small size fool you. But it does cost about $40, which seems like a lot to me, but you get what you pay for.
https://www.knifecenter.com/kc_new/store_store.html?usrsearch=Case+Work+Series+Small+Stockman+2.625%22+Jigged+Brown+Synthetic+Handles+%286333+SS%29+-+00081
 

·
Registered
Joined
·
1,571 Posts
Discussion Starter · #20 ·
What The Iranians Have To Look Forward To.

[video=youtube;kGH-zBHbPKc]https://www.youtube.com/watch?v=kGH-zBHbPKc[/video]
 
1 - 20 of 87 Posts
Top